Are you looking for high-perfomance routing solution for your design needs?
Try TopoR - unique topological autorouter that routes your design with gridless free-angle technology. Topological algorithm allows to get far superior result if compare to any available shape-based or grid-based autorouter, in most cases superior to time-consuming qualified manual routing.

TopoR provides the following features:

High-quality autorouting and improved electro-magnetic compatibility
Route the wiring topology automatically and flexibly (directions are not limited by 90 and 45 degree). TopoR routes with less number of vias/layers and length of traces if compare to other autorouters. Each wire has a minimal length and goes around pads with a proper clearance. Absence of preferred routing directions in layers considerably reduces wire parallelism, which in its turn reduces electromagnetic crosstalks.

Easy to learn user interface
TopoR has intuitive user interface that allows you to learn it and make your first free-angle design in few hours. Before all operations TopoR shows tips that helps in your work. User manual and tutorials guides your through the routing process and allows to get started with ease.

Simultaneous optimization of multiple layout versions
TopoR can perform parallel optimization of several alternative topology variants, which differ in optimized parameters, while the user is offered a choice of selecting one or several variants.

Ability to assign minimal and preferred clearance for each net
A user can immediately define the technical possibility of routing the board within the limits of the specified number of layers, specified clearance and other technical limitations based on the routing density and the amount of technical constraints violations.

TopoR can displace components on a routed board
One the unique features of TopoR is its capability to move components on the routed board while preserving the connections topology. Geometry and positioning of components are automatically calculated to comply with the new components position. Movement of components, vias and wire branching is used to decrease wires length, provide the utmost clearance space which should be not less than required (to eliminate the narrow spaces). Movement can be performed both manually and automatically, and the most effective wires shape is defined immediately.

Smart BGA component routing
Due to absence of preferred routing directions in layers and deep level of optimization TopoR provides quality routing of contemporary BGA components, which is traditionally a very difficult problem for other routers.

Interface with CAD Systems
TopoR supports standard Specctra DSN/SES interface that most CAD systems have. Also TopoR can import/export P-CAD and PADS ASCII formats.

Design Rule Check
TopoR checks minimum and optimal clearances between traces, pads and vias on each stage of the design work. You can move/rotate components and edit traces based on DRC results.

Shape-based copper pour
Powerful copper pour system can help to reduce your manufacturing costs by minimizing the amount of etching solution required. To use it, all you have to do is insert a copper area on your board and any pad or trace inside the selected area will be automatically surrounded with a gap of the desired size.

Manufacturing output formats
TopoR provides support for a number of different manufacturing output formats. You can produce DXF, N/C Drill files for numerically controlled (N.C.) drilling machines and RS-274X Gerber files for sending to board manufacturers.